***************************************************************************** * IBM ThinkPad March 18, 2005* * Intel Chipset Support II for Windows 98 SE/2000/XP * * Version 4.20.1009 * ***************************************************************************** Notice: ------- - If you use the Product Recovery function shipped with your ThinkPad to restore the Windows preload environment, you do not need this package. This package is required when you install Windows Operating Systems without the Product Recovery function. - This program is based on the US version but, this is language independent and can be used with any language system. ***************************************************************************** * CONTENTS OF THIS DOCUMENT * ***************************************************************************** This document contains the following sections. 1. What This Package Does 2. Installing the Software in Interactive Mode 3. Installing the Software in Silent Mode 4. Installing the INF Files Prior to OS Installation 4A. Installing the Windows 2000/XP INF Files Prior to OS Installation 4B. Installing the Windows 98SE INF Files Prior to OS Installation ***************************************************************************** * 1.WHAT THIS PACKAGE DOES * ***************************************************************************** This package contains following support modules. - To detect and configure the INTEL 845 chipset and 855 chipset The following ThinkPad computers are supported: - ThinkPad R40 - ThinkPad R50(*1)/R50p(*1) - ThinkPad R51 (Machine Type 1829,1830,1831,1836,1840,1841)(*1)(*2) - ThinkPad T40/T40p/T41/T41p/T42/T42p(*1) - ThinkPad X31/X32(*1) NOTES: - (*1) Only Windows 2000/XP are supported. - (*2) Machine Types 2883, 2887, 2888, 2889, 2894 and 2895 of ThinkPad R51 family are not supported. Please get the package of Intel Chipset Support III for them, and install it, as well. To determine if you should update the supplement files, refer to the "Summary of Changes" section. To update the supplement files, refer to the "Installation Instructions" section. Released Versions ----------------- Version 1.00 Initial release Version 1.01 Update Version 1.02 Update Version 4.20.1009 No update, but change of only the version notation Summary of Changes ------------------ Where: < > Version (New) New function or enhancement (Fix) Correction to existing function <1.00> - (New) Detect and Configure INTEL 845/855 Chipset. <1.01> - (New) Updated Installer to reflect proper license agreement <1.02> - (New) Update for ThinkPad Software Installer Support <4.20.1009> - No update from version 1.02. Only the version notation was changed from 1.02 to 4.20.1009, in order to unite with the version notation of Intel. File versions ------------- infinst_autol.exe 12/04/2002 13:55 ibmtpi.xml 08/25/2004 14:29 ***************************************************************************** * 2. INSTALLING THE SOFTWERE IN INTERACTIVE MODE * ***************************************************************************** Apply this program to enumerate INTEL chipset correctly after installing base operating system with each supplement files. Installation : 1. Close any running applications. 2. Run the InstallShield* installation program in INTELINF folder. Windows XP/2000: INFINST_autol.exe Windows 98 SE: INFINST_autol.exe -a -USB2 3. You will be prompted to agree to the license agreement. If you do not agree, the Installer will exit before extracting any files. 4. Follow the on-screen instructions and use the default settings to complete the setup, once the operating system has rebooted. 5. This completes the installation of the Intel(R) Chipset Software Installation Utility. ***************************************************************************** * 3. INSTALLING THE SOFTWERE IN SILENT MODE * ***************************************************************************** Unattended installation (common for Windows 98 SE/2000/XP): Run infinst_autol.exe with the command line flags as follows. Windows XP/2000: INFINST_autol.exe -a -s Windows 98 SE: INFINST_autol.exe -a -s -USB2 ***************************************************************************** * 4. INSTALLING THE INF FILES PRIOR TO OS INSTALLATION * ***************************************************************************** How to extract Windows INF files prior to OS installation: 1. Click Start, then click Run. 2. Type infinst_autol.exe -a -a -p C:\INTEL (for example ) in Open column. 3. Click [OK]. 4. Setup Screen (INTEL Chipset Software Installation Utility V4.20.1009) appears. NOTE: This stage just runs the installShield program and does not extract the INF and CAT files. 5. Click [Next] in "Welcome to the InstallShield Wizard for". 6. Click [Yes] to Accept License Agreement. 7. Click [Next] at ReadMe Information screen. 8. Progress bar shows the extract status. After reaching 100%, the INF and CAT files have been extracted in C:\INTEL folder. 9. Check C:\INTEL folder. 10. You can see "ICH-4" folder and others in C:\INTEL directory. 11. You can use the INF and CAT files from the Win2000, Win98, Win98SE, XP folders for installation. 12. The subdirectory that you want to use is C:\INTEL\ICH4\. ***************************************************************************** * 4A. INSTALLING THE WINDOWS 2000/XP INF FILES PRIOR TO OS INSTALLATION * ***************************************************************************** Windows 2000/XP 1. Create the following directory structure under the : \$OEM$\$$\INF 2. Copy the Windows INF files from the the following folder to the directory created in Step 1 above. Windows 2000: C:\INTEL\ICH4\Win2000 Windows XP: C:\INTEL\ICH4\XP 3. Create the following directory structure under the : \$OEM$\$1\drivers\IntelINF 4. Copy the Windows INF files AND the catalog files (.CAT) from the folder listed in step 2 to the directory created in Step 3 above. 5. Either modify the default Windows installation answer file, UNATTEND.TXT, located in , or create a customized answer file. The answer file must include the following information: [Unattended] OemPreinstall = Yes OemPnPDriversPath="drivers\IntelINF" 6. Run "WINNT.EXE /u: /s:" to install Windows. ***************************************************************************** * 4B. INSTALLING THE WINDOWS 98SE INF FILES PRIOR TO OS INSTALLATION * ***************************************************************************** Windows 98 SE 1. Copy the Windows 98 Second Edition INF Files from C:\INTEL\ICH4\Win98SE to Windows setup directory. 2. Depending on your content, there are two cases: Case A: CUSTOM.INF file is NOT present in the In this case, rename INFPRELO.INF to CUSTOM.INF. Case B: CUSTOM.INF is present in the In this case, incorporate the content of INFPRELO.INF into the existing CUSTOM.INF file. 3. Run SETUP.EXE to install Windows. Trademarks ---------- * IBM and ThinkPad are registered trademarks of IBM Corporation. * Intel is a registered trademark of Intel Corporation. * Microsoft and Windows are registered trademarks of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.