IBM ThinkPad                                             May 6, 2004
Installation Support for Windows 98/98 SE

Version 1.01
======================================================================

Notice:
-------
- If you use the Product Recovery function shipped with your ThinkPad
  to restore the Windows preload environment, you do not need this
  package. This package is required when you install Windows Operating
  Systems without the Product Recovery function.

What This Package Does
-----------------------
This package contains:
        - APM mode installation file for Windows 98/SE

This package is applicable to:

  - ThinkPad R40
  - ThinkPad T30
  - ThinkPad T40/T41/T42
  - ThinkPad X30/X31


Released Versions
-----------------
Version 1.00     Initial release
Version 1.01     Updated release

Summary of Changes
------------------
Where: <n.nn>  Package version (for example, 1.00 means Version 1.00)
       (New)   New function or enhancement
       (Fix)   Correction to existing function
       (Restrictions)  Remaining restrictions

<1.00>
 -(New) LCD panel resolution support
 -(New) Windows 98/SE APM mode installation support.

<1.01>
 -(Fix) Delete "INF files for Laptop resolution". Because newer version
        is included in the fllowing package:
         ``IBM ThinkPad Monitor File for Windows 98/98 SE/Me/2000/XP''
 -(Fix) Remove ThinkPad G40 from applicable system because "INF files
        for Laptop resolution" was removed.

Installation Instructions
-------------------------
I. Windows 98 (Version 4.10.1998)
===================================
I. Installation of Windows 98 Operating System.

 1. Extract package onto your hard disk drive (HDD). Assume extracted
    Directory is C:\DRIVERS\W9X\INSTW98 in this guide.

 2. Copy all the cabinet files and installation programs in Windows 98
    retail CD-ROM to your HDD as follows.

   2.1. Make a temporary directory (for instance, C:\WIN98) and make
        sure enough hard disk space is available to store the cabinet
        files and installation programs (the required free space vary
        depending on the language of Windows 98)

   2.2. Copy all the cabinet (.CAB) files and installation programs
        from \WIN98 directory of Windows 98 CD.

    Type COPY src_cd:\WIN98\*.* tgt_drv:\tgt_dir and press Enter
    where
    src_cd:   Drive Letter of CD-ROM drive ( e.g. D:, E: ...)
    tgt_dir:  Drive Letter and Temporary directory

 3. Copy updated INF files from extracted directory to the temporary
    directory

    Type COPY C:\DRIVERS\W9X\INSTW98\W98GOLD\*.*  tgt_drv:\tgt_dir
    and press Enter.

   tgt_drv:\tgt_dir: Drive Letter and temporary directory made in 2.1.
                      (e.g. C:\WIN98)

 4. Start Installation from the temporary directory

   4.1. Run Setup.exe in the temporary directory

   4.2. Refer to the Windows 98 documentation and instructions on the
        screen to complete the installation.


II. Windows 98 Second Edition (4.10.2222A)
==========================================
 1. Extract package onto your HDD. Assume extracted Directory is
    C:\DRIVERS\W9X\INSTW98 in this guide.

 2. Copy all the cabinet files and installation programs in
    Windows 98 Second Edition retail CD-ROM to your HDD as follows.

   2.1. Make a temporary directory (for instance, C:\WIN98) and make
        sure enough hard disk space is available to store the cabinet
        files and installation programs (the required free space vary
        depending on the language of Windows 98)

   2.2. Copy all the cabinet (.CAB) files and installation programs
        from \WIN98 directory of Windows 98 Second Edition CD.

    Type COPY src_cd:\WIN98\*.* tgt_drv:\tgt_dir and press Enter
    where
    src_cd:   Drive Letter of CD-ROM drive ( e.g. D:, E: ...)
    tgt_dir:  Drive Letter and Temporary directory

 3. Copy updated INF files from extracted directory to the temporary
    directory

    Type COPY C:\DRIVERS\W9X\INSTW98\W98SE\*.*  tgt_drv:\tgt_dir
    and press Enter.

   tgt_drv:\tgt_dir: Drive Letter and temporary directory made in 2.1.
                      (e.g. C:\WIN98)

 4. Start Installation from the temporary directory

   4.1. Run Setup.exe C:\Win98\APMINST.INF in the temporary
        directory.

   4.2. Refer to the Windows 98 documentation and instructions on the
        screen to complete the installation.


Determining which version is installed
--------------------------------------
This Package has following files.

[Windows 98]
Version             1.01
------------   --------------
pcmcia.inf      00/06/22 13:39
machine.inf     00/03/16 13:38

[Windows 98 Second Edition]
Version             1.01
------------   --------------
apminst.inf     99/11/12 16:14


Trademarks
----------
* IBM and ThinkPad are registered trademarks of IBM Corporation.

* Microsoft and Windows are registered trademarks of Microsoft
  Corporation.

Other company, product, and service names may be registered 
trademarks, trademarks or service marks of others.